Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
PK 27002 SH High Performance
Functional Design. Protection for sensitive components enhances appearance and long-term value retention.
- More efficient and faster due to continuous slewing system
- Additional applications due to Power Link Plus
-
Increased operating times due to low-maintenance extension system
-
Higher payloads due to intelligent lightweight design
-
More comfort and safety due to Soft Stop
Max. lifting moment | 26.0 |
Max. lifting capacity | 9300 |
Max. hydraulic outreach | 21.3 |
Max. manual outreach | 23.3 |
Max. outreach (with fly jip) | 29.4 |
Slewing angle | ∞ |
Slewing torque with 1 gear | 2.8 |
Slewing torque with 2 gears | 3.4 |
Stabilizer spread (std) | 5.6 m |
Fitting space required (std) | 1.01 |
Width folded | 2.55 |
Max. operating pressure | 365 |
Pump capacity | 80 - 110 l/min |
Dead weight (std.) | 2679 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Lifting moment | Outreach | Slewing angle | Slewing torque (mt) | Pressure | Pump capacity (l/min) | Crane Weight | Crane Height | Crane Width | Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
A | 25.3 mt | 8.1 m | ∞ | 2.8 / 3.4 | 36.5 Mpa | 80-110 | 2722 kg | 2330 mm | 2550 mm | 1010 mm | 7880.01 mm | 9300 kg | 3150 kg |
B | 24.7 mt | 10.2 m | ∞ | 2.8 / 3.4 | 36.5 Mpa | 80-110 | 2903 kg | 2330 mm | 2550 mm | 1010 mm | 10060.01 mm | 8900 kg | 2350 kg |
C | 24.2 mt | 12.4 m | ∞ | 2.8 / 3.4 | 36.5 Mpa | 80-110 | 3082 kg | 2330 mm | 2550 mm | 1090 mm | 12240.01 mm | 8600 kg | 1780 kg |
D | 23.6 mt | 14.6 m | ∞ | 3.4 | 36.5 Mpa | 80-110 | 3319 kg | 2330 mm | 2550 mm | 1130 mm | 14420.01 mm | 8200 kg | 1360 kg |
E | 23.2 mt | 16.8 m | ∞ | 3.4 | 36.5 Mpa | 80-110 | 3465 kg | 2330 mm | 2550 mm | 1130 mm | 16650.01 mm | 7900 kg | 1040 kg |
F | 22.8 mt | 19.1 m | ∞ | 3.4 | 36.5 Mpa | 80-110 | 3578 kg | 2330 mm | 2550 mm | 1140 mm | 18880.01 mm | 7600 kg | 820 kg |
G | 22.5 mt | 21.3 m | ∞ | 3.4 | 36.5 Mpa | 80-110 | 3687 kg | 2330 mm | 2550 mm | 1160 mm | 21110.01 mm | 7300 kg | 630 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.